We understand that many homeowners don’t have the time, knowledge or inclination to perform regular checks and maintenance on their HVAC systems. Setting up a convenient and affordable service plan with G & G Comfort is an easy way to protect this major investment and keep everything running at peak efficiency. We can create a custom seasonal maintenance schedule that will fit your specific needs, budget and lifestyle.

Our Preventative Service Plan includes:

15 Point Cooling Tune-Up

1. All moving parts will be cleaned and oiled.
2. Operating pressures and temperatures will be checked and adjusted.
3. Refrigerants will be checked to ensure the system is working efficiently.
4. All unit wiring will be thoroughly inspected.
5. Flush condensate drain to protect against overflow.
6. Clean outdoor condenser coil.
7. Clean and check blower motor (and belt, if applicable).
8. Test temperature drop at return and supply air; adjust blower speed if needed.
9. Safety test all controls for proper operation.
10. Check voltage and amperage in all motors; test for worn bearings.
11. Check condition of compressor contacts to be sure they aren’t pitted.
12. Inspect start and run capacitors and relays for bulges, rust and leaks.
13. Clean and safety test all wires and connections.
14. Inform customer of equipment condition; recommend necessary repairs or comfort improvements.
15. Visually inspect duct work for wear and leaks.

19 Point Heating Tune-Up

1. Test carbon monoxide levels.
2. Clean and adjust burners and inspect heat exchanger.
3. Check thermostat operation.
4. Lubricate all motors, bearings, fans and circulation pumps.
5. Clean pilot assembly.
6. Test and adjust operation of safety and operating controls.
7. Inspect flue pipe and gas valve.
8. Check blower motor (and belt, if applicable).
9. Test and tighten all wiring and connections.
10. Turn exposed dampers to heating position if marked (no balancing).
11. Flush condensate drain to protect against overflow.
12. Check temperature rise.
13. Check fan speeds.
14. Check gas pressure at gas valve.
15. Inform customer of equipment condition; recommend necessary repairs.
16. Run combustion safety tests.
17. Visually inspect duct work for wear and leaks.
18. Visually inspect weather stripping.
19. Check for gas leaks.

You can’t schedule when your system will breaks, but you CAN schedule preventative maintenance to ensure it continues working all year long.

G & G Comfort specializes in maintenance needs in Goodlettsville and the surrounding area. Call 615-973-7137 today and set up your plan!